Mechanical and electrical products: blowers, pumps, valves, motors, etc

Product Introduction: The G Series single-screw pump operates on the rotary meshing positive displacement principle. Its main working components are an eccentric screw (rotor) and a fixed sleeve (stator). The unique geometry of these two components creates separate sealed chambers, allowing the medium to flow evenly along the axial direction. This results in low internal velocity, low noise, constant volume, and stable pressure. This eliminates eddy currents and agitation, preventing the medium from disrupting its inherent structure. Because the stator is constructed from a variety of elastic materials, Sunshine Pump's screw pumps are exceptionally capable of conveying high-viscosity fluids, media containing hard, suspended particles, or fibers, unlike conventional pumps. Their flow rate is proportional to the speed. Product Advantages: · Continuous, low-pulsation conveying, unaffected by pressure and viscosity fluctuations. · Wide range of applications, capable of conveying both flowing and non-flowing materials. · The medium is not agitated, extruded, or sheared during the pumping process. · High efficiency, with the delivery rate proportional to the speed, and variable frequency control of the delivery rate. · Most liquids can be pumped with minimal agitation and pulsation. Easy to maintain and overhaul, with high-pressure transmission capabilities. Applications: Petroleum industry: heavy oil transportation, mixed oil and gas transportation, oil-water separation, and waste oil recovery systems. Chemical and pharmaceutical industries: various pastes, emulsions, suspensions, etc. Environmental engineering: various sewage transportation, dewatered sludge transportation, metered dosing of flocculants and their chemical preparations. Mineral engineering: production equipment for titanium dioxide, kaolin, calcium carbonate, etc. Food industry: dairy products, juice, fruit puree, vegetable sauce, beer, etc. Paper industry: raw material equipment, pulping, and wastewater treatment.